The ALVA2 project - working together to increase robustness and predictability of hot forming aluminum

Collaborations between industry and academia can result in powerful practical insights. We’re proud to have been part of the ALVA2 project consortium on hot forming aluminum. Continue below to read more!

RISE logo

Industrial research and development is driven by regional market needs in 3 to 5 years. Although long-term industrial success is often built on a detailed understanding of the application, the industry itself is often limited in its research capacity and analytical instrumentation. Universities and research laboratories, on the other hand, can provide in-depth characterization methods and highly educated and skilled engineers. This gives them a huge potential to support industry needs, for instance in the ALVA2 project consortium on hot forming of aluminum.

RISE – Research Institutes of Sweden

Coating solutions for forming and molding tools | Ionbond

Aluminum – a critical yet challenging material

Hot forming of aluminum is receiving increased attention in the automotive industry – in particular due to the need of modern vehicles for lightweight design, improved fuel economy, and robustness. The low density of aluminum and its ability to be formed into complex geometries make it a very attractive material. However, there are key aspects to hot forming of aluminum which are not adequately understood, such as the frictional and wear behavior during interaction of the tool and the aluminum workpiece at high temperatures. Understanding this is important to optimize hot forming processes for product shape and quality, equipment maintenance and process economy.

IMG 0435

Joint tribological research project into hot forming of aluminum

For this reason, IHI Ionbond and our partners from industry have joined forces with Luleå Technical University to establish ALVA2, a project consortium with competences covering all tribological aspects in hot forming aluminum, including tool steel, lubrication and surface coatings. Between August 2019 and July 2022, the consortium successfully raised the level of understanding about tribological phenomena in hot forming aluminum. Part of their success was in developing and implementing advanced friction modelling into forming simulations.

Tetrabond deposited on trimming dies for sheet aluminum forming

IMG 0385

New testing approaches and new insights

During the project, a newly designed strip-pull test was used to investigate frictional and wear behavior under adjustable and repeatable conditions close to the application. The project team gained substantial insights into the interaction of tribological stresses, coating solution, tool, workpiece material and lubricant, which will help the involved industry partners to develop the next generation of coating solutions for hot forming aluminum.
The results of the strip-pull tests show that the right coating material, with a high adhesion resistance against the workpiece, and the suitable surface quality of the coated tool ensures minimal friction over the entire range of relative velocity of the test – from breaking away when starting up to reaching the constant maximum relative velocity between tooling and workpiece material. We are looking forward to the final project report.

Tetrabond deposited on trimming dies for sheet aluminum forming

Bottle cap mold shadow

More information?

Check the website from RISE – Research Institutes of Sweden – for more information or download the factsheets for our premium coatings:

Would you like to learn more about the key findings from the project? Or discuss your hot forming application and how Ionbond can help you to increase your production process and product quality?

Don't hesitate to get in touch with Dr. Ing. Tobias Brögelmann, Ionbond’s Global Segment Manager Forming and Molding Tools via our contact form below.

Ionbond™ 42 coated forming tool

Get in touch

Discuss your challenges with Tobias Brögelmann

Tobias Brögelmann, Global Segment Manager Forming and Molding Tools, will be glad to support you.

We will get in contact with you as soon as possible

Tobias Broegelmann

Dr. Ing. Tobias Brögelmann

Global Segment Manager Forming and Molding

You might be interested...

Service Centers
Decorative automotive coating solutions | Ionbond

Major capacity increases at Ionbond Greensboro

Good news for customers in the USA and Canada: Ionbond has invested in its facility in Greensboro, doubling its capacity for decorative PVD coatings. The new machines not only increased the plant's overall coating capacity, but also its coating portfolio, including the color selection of decorative coatings.

Read more
Service Centers
Tetrabond Plus Tools

Ionbond Germany now offers Tetrabond™ Plus

Tetrabond® Plus is now offered at Ionbond Germany's Saxony facility. This tool coating is ideal for machining non-ferrous materials, including aluminum alloys, copper alloys, plastics, and composite materials, making it particularly valuable for applications in the aerospace and automotive industries.

Read more
Rockaway Team DLC Hybrid Machine

Ionbond Rockaway enhances DLC coating capacity to support growing medical instrument industry

With the addition of a cutting-edge Hauzer 1200 PVD/PACVD hybrid tool, we're geared up to meet the soaring demand for quick turnaround times from our surgical instrument clients.

Read more
Industrial components coating solutions | Ionbond

Tribobond™ 51/52/54 – Wear resistance for highly corrosive environments

Modern machinery, with its intricate demands for precision and reliability amid cost pressures, faces challenges. Coatings that provide both corrosion and wear protection are scarce. Read on for insights into innovative solutions addressing this critical gap.

Read more
Decorative automotive coating solutions | Ionbond

Ionbond PVD coatings for automotive interior applications

Are you looking to stand out in automotive interior design with novel colors and increased wear resistance of design elements? Check out Ionbond’s expertise in PVD coatings at the Automotive Interiors Expo Novi from 24-26 October and find out more in below article.

Read more
H2 Hydrogen Charge Station

Ionbond joins Hydrogen Engine Alliance to advance the hydrogen internal combustion engine

Ionbond is proud to join the Hydrogen Engine Alliance! We’re looking forward to lending our expertise to the further development of this interesting technology for carbon-neutral mobility.

Read more
Aurora X Plus Composition 2 c

AuroraX Plus: new versatile coating for a wide range of cutting applications

Have you been looking for a superior tool coating for difficult-to-cut materials? Look no further! Ionbond's new AuroraX Plus coating offers the performance you need in both wet and dry conditions, making it a great all-round tool coating.

Read more
Decorative sanitary coating solutions

NEW Whitepaper: Decorative surfaces that withstand extreme environments

Are you looking for a coating to help your products keep their high performance in extreme environments?

Read more
Decorative coating solutions for automotive interior | Ionbond

Ionbond’s high-quality decorative coatings for extreme environments

Curious about the magic behind long-lasting, beautiful items? Dive into the latest developments in Physical Vapor Deposition (PVD) coatings, revealing the secrets of our decorative finishes.

Read more
Coating solutions for forming and molding tools | Ionbond

New Whitepaper on Duplex Coating Solutions for High-Pressure Die Casting

Read along to find out why high-pressure die casting is becoming increasingly popular for high-volume mass production of complex-shaped parts.

Read more
Scientist XPS special coatings

Tribobond™ 55 – new coating for vacuum and dry gas environments

Ionbond presents Tribobond™ 55, developed specifically for vacuum and dry gas environments!

Read more
Ionbond Duplex Coatings Plasma Nitriding parts

Ready to learn more about Ionbond’s duplex coating solutions?

Download our comprehensive technical presentation, including fundamentals, illustrative examples and real case studies of our duplex coatings in use at Ionbond’s clients.

Read more
New plasma nitriding system Madison Heights

Unlocking the Potential of Duplex Coatings: Insights from Ionbond's Experts

With our new duplex coating capabilities in Ionbond Madison Heights, we’re ready to help our customers in forming and molding make big improvements in their tool productivity. Read what our team of experts has to say about these game-changing coatings.

Read more
Coating solutions for forming and molding tools | Ionbond

Enhancing tool performance and productivity: Ionbond introduces duplex coatings

Discover the power of Ionbond’s duplex coatings! Our state-of-the-art plasma nitriding equipment combined with PVD coating technology offers exceptional impact fatigue strength and wear resistance. Elevate your tool performance and enjoy reduced downtime for maximum productivity.

Read more
New CVD machine Olten

New Hall: More Space at Ionbond Olten

The Ionbond plant in Olten is one of the largest CVD coating centers in Europe, if not the world. Recently, it’s grown even larger, with the inauguration of their new machine hall. In this article, we talk to Robert Jäggi, Country Manager, about the expansion of the coating capacity and his plans for the future.

Read more