Getting to the root of observations at the Surface Analysis Lab

The Ionbond Surface Analysis lab is part and parcel of our customers’ success in industrial components. The lab is staffed by an experienced team with highly creative problem-solving skills. Read on to find out how they work!

Ionbond Surface Analisys Lab Switzerland

Ionbond Surface Analysis lab

Ionbond is involved in highly sophisticated technical projects, from plasma thrusters to high-precision machine components and everything in between. Part of the success of all applications, and therefore our customers’ success, depends on our ability to analyze what we produce – with speed, breadth and clarity. That is why we have many excellent labs in our global network.

Today, the spotlight is on the Ionbond Surface Analysis lab in Dulliken, Switzerland, staffed by a 4-person team who are all experts in their own right.

Ionbond Surface Analisys Lab Nano Hardness measurement 2

Supporting the success of Ionbond customers

Andreas Göb, head of the lab, and his team spend their time supporting Ionbond customers as well as Ionbond development projects in several ways. An important part is quality control on all produced batches, to see if the specified coating properties like layer thickness, surface roughness or adhesion of the coating on the substrate comply with the specification. Depending on the application and the workpiece material, substrate hardness is also measured to prove that it was not affected by the deposition temperature. If everything meets specifications, a certificate of conformity is issued by the lab.

Another critical aspect of the work is failure analysis and learning from it, whether the failure is a visible coating delamination, detectable immediately after processing or feedback from customers about product performance. Andreas: “Since we have the analytical capabilities and expertise, customers come to us to help them figure out how to resolve these issues – whether they arise before, during or after coating.”

Ionbond Logo 2020 RGB
Industrial components coating solutions | Ionbond
“Coatings for these applications require a lot of front-end research and qualification before they can be brought to market, and the Dulliken lab is an absolutely critical asset to support these activities.”

Finally, the Surface Analysis lab supports Ionbond engineers in R&D and qualifying new coatings. The lab often has to deal with expensive precision components that go into complex assemblies in various industries – from semiconductor tools to luxury watches to highly productive manufacturing applications.

Val Lieberman

Dr. Val Lieberman

Global Segment Manager Industrial Components

Ionbond Surface Analisys Lab Switzerland 2

Analysis capabilities at the Surface Materials lab

The lab is equipped with state-of-the-art analysis techniques for destructive and nondestructive testing. Andreas: “Because we often work with expensive products, all routine destructive tests are done on witness parts that receive the same treatment as the real parts. Occasionally, especially when we are solving a problem, customers will give us permission to cut into the actual component.”

Available analytical capabilities:

Thickness measurement

Ball crater technique, metallographic cross section technique, confocal microscopy

Surface roughness

Confocal microscopy


HRC Rockwell indenter

Nano hardness

Hardness by nano indentation (HIT)

Adhesion test

Rockwell and scratch tester

Failure analysis

FE-scanning electron microscopy (SEM), special metallographic techniques

Chemical analysis

Energy-dispersive X-ray (EDX) for chemical analysis


Tactile and optical options

Wear and friction

Measurements in reciprocating conditions

Ionbond Surface Analisys Lab optical microscopes 2

Complex analyses require a top expert team

These analyses are done by a highly experienced lab team, with expertise in materials science and analytical methods. Andreas: “Our work, and especially failure analysis, requires creativity, delicacy, experience and skepticism. You always need to question yourself and avoid any bias related to past experiences. Are you making the right assumptions? Do the numbers make sense? It is also critical to have access to information on how the part in question is used in the field, how it was assembled or handled and treated prior to appearance of the problem.”

Andreas himself has almost 30 years’ experience, gained in the automotive, electrical engineering, semiconductor and medical sectors, of which 20 years in failure analysis. Val: “Andreas has seemingly seen all the failure modes and has a profound knowledge of analytical methodologies. That means he has a big mental database of previous cases that he may draw from. We often call his lab ‘CSI Dulliken’. With this experience, he can find good solutions for virtually any situation – and very fast, too.”

SEM Component Contamination

Case study: the mysterious discoloration

A customer requested Ionbond to assess dark spots on an Ionbond coating on a large tube-like component of a complicated assembly. The component had been exposed to an aggressive environment, so the worry was it had attacked the coating and that this had led to the formation of the dark spots. “Because the component was so big,” recalls Andreas, “I cut out several of the black spots for analysis in our SEM to determine the composition by EDX. I detected the presence of some unusual chemistry that did not belong to either the coating or substrate. After receiving additional information from the customer on how the component was assembled, I could conclude that these black spots originated from the mating part, which was operated at an excessive temperature. The EDX data nicely confirmed this hypothesis. Fortunately, the TiN coating itself was entirely intact under the discoloration. This important fact was proved by a subsequent metallographic investigation of several of those spots.”


Discuss your challenges with Val Lieberman

Dr. Val Lieberman, Global Segment Manager Industrial Components, will be glad to support you.

We will get back to you as soon as possible.

Val Lieberman

Dr. Val Lieberman

Global Segment Manager Industrial Components

You might be interested...

Tetrabond 48 trimming dies

Performance boost in aluminum forming: enabling cost-effective trimming of aluminum with Tetrabond™ (ta-C)

For companies in sheet metal forming, the generation of burrs and slivers is an ongoing challenge, especially when it comes to forming aluminum alloys. Burrs and slivers can reduce the final product quality and are costly to remove, which drives the search for solutions that prevent them from forming. Ionbond’s solution for this challenge is our Tetrabond tetrahedral amorphous carbon (ta-C) coating – a thin, extremely hard coating with a smooth surface and low sticking.

Read more
Dulliken charge

Ionbond: high-tech coatings for luxury accessories available throughout Europe

Ionbond has been a leader in high-performance coatings for decades, for both technical applications and the luxury segment. In luxury products, we have especially earned a name for ourselves in beautiful, durable and high-quality coatings for watches, serving top brands. Today, this know-how has been extended to high-end accessories.

Read more
Cutting Tools coating solutions | Ionbond

Ionbond’s coating solution for machining of non-ferrous materials for EU manufacturing industry

Are you looking to increase the performance of your cutting tools for machining non-ferrous materials? Ionbond has a coating solution that helps combat built-up edges, abrasive wear and more. It was designed specifically to allow you to make use of the great material properties of these materials, while increasing manufacturing efficiency.

Read more
Service Centers
Decorative automotive coating solutions | Ionbond

Major capacity increases at Ionbond Greensboro

Good news for customers in the USA and Canada: Ionbond has invested in its facility in Greensboro, doubling its capacity for decorative PVD coatings. The new machines not only increased the plant's overall coating capacity, but also its coating portfolio, including the color selection of decorative coatings.

Read more
Service Centers
Tetrabond Plus Tools

Ionbond Germany now offers Tetrabond™ Plus

Tetrabond® Plus is now offered at Ionbond Germany's Saxony facility. This tool coating is ideal for machining non-ferrous materials, including aluminum alloys, copper alloys, plastics, and composite materials, making it particularly valuable for applications in the aerospace and automotive industries.

Read more
Rockaway Team DLC Hybrid Machine

Ionbond Rockaway enhances DLC coating capacity to support growing medical instrument industry

With the addition of a cutting-edge Hauzer 1200 PVD/PACVD hybrid tool, we're geared up to meet the soaring demand for quick turnaround times from our surgical instrument clients.

Read more
Industrial components coating solutions | Ionbond

Tribobond™ 51/52/54 – Wear resistance for highly corrosive environments

Modern machinery, with its intricate demands for precision and reliability amid cost pressures, faces challenges. Coatings that provide both corrosion and wear protection are scarce. Read on for insights into innovative solutions addressing this critical gap.

Read more
Decorative automotive coating solutions | Ionbond

Ionbond PVD coatings for automotive interior applications

Are you looking to stand out in automotive interior design with novel colors and increased wear resistance of design elements? Check out Ionbond’s expertise in PVD coatings at the Automotive Interiors Expo Novi from 24-26 October and find out more in below article.

Read more
H2 Hydrogen Charge Station

Ionbond joins Hydrogen Engine Alliance to advance the hydrogen internal combustion engine

Ionbond is proud to join the Hydrogen Engine Alliance! We’re looking forward to lending our expertise to the further development of this interesting technology for carbon-neutral mobility.

Read more
Aurora X Plus Composition 2 c

AuroraX Plus: new versatile coating for a wide range of cutting applications

Have you been looking for a superior tool coating for difficult-to-cut materials? Look no further! Ionbond's new AuroraX Plus coating offers the performance you need in both wet and dry conditions, making it a great all-round tool coating.

Read more
Decorative sanitary coating solutions

NEW Whitepaper: Decorative surfaces that withstand extreme environments

Are you looking for a coating to help your products keep their high performance in extreme environments?

Read more
Decorative coating solutions for automotive interior | Ionbond

Ionbond’s high-quality decorative coatings for extreme environments

Curious about the magic behind long-lasting, beautiful items? Dive into the latest developments in Physical Vapor Deposition (PVD) coatings, revealing the secrets of our decorative finishes.

Read more
Coating solutions for forming and molding tools | Ionbond

New Whitepaper on Duplex Coating Solutions for High-Pressure Die Casting

Read along to find out why high-pressure die casting is becoming increasingly popular for high-volume mass production of complex-shaped parts.

Read more
Scientist XPS special coatings

Tribobond™ 55 – new coating for vacuum and dry gas environments

Ionbond presents Tribobond™ 55, developed specifically for vacuum and dry gas environments!

Read more
Ionbond Duplex Coatings Plasma Nitriding parts

Ready to learn more about Ionbond’s duplex coating solutions?

Download our comprehensive technical presentation, including fundamentals, illustrative examples and real case studies of our duplex coatings in use at Ionbond’s clients.

Read more