CVD Coating Technology

CVD, a proven Technology

This technology allows the production of Ti, Zr or Cr-based coatings in the form of nitrides, carbides and carbonitrides. In addition, high quality α- and κ-alumina (aluminum oxide) films are readily obtainable by the CVD method. Modern CVD processes are highly sophisticated, employing the latest advances in instrumentation and automation. This results in robust and reliable operations with high yield rates.

It is commonly thought that thermal CVD coatings can be applied only onto substrates made out of tool steels (mostly with post coating heat-treatment) or cemented carbide. Indeed, production of such coatings is associatedwith high process temperatures, ranging from 800 to 1000°C (1470 to 1830°F). These temperatures do prohibit coating of certain materials, and mandate a new round of heat treatment after coating for other ones. PVD and PACVD coatings, deposited at lower temperatures, are free from these limitations, which makes them an easier choice for production of wear resistant films on engineered components. We would argue, however, that plenty of applications exist for which CVD would be a better choice than PVD/PACVD.

CVD Coating Machine Bernex

Material considerations & Wear resistance

Contrary to common belief, CVD is perfectly suitable for a few major types of steels and alloys without further heat treatment. These materials do not undergo phase transformation below or at the processing temperature.

CVD coatings are widely used for protection against wear in different applications and industries. Following below are a few examples:

  • Ball valve hardware (balls, seats, packing)
  • Nozzles for water-jet applications
  • Textile components (runners, travelers)
  • Ceramic extrusion dies for diesel particulate filter and catalytic converter manufacture

Read this and more in our whitepaper where we go into much more detail on all these topics and the development and performance of CVD coatings for components. Download it today and learn more.

In addition, our experts look forward to interesting discussions with you about our CVD coatings and other coating solutions.

Whitepaper

CVD Coatings for Engineered Components

Download the whitepaper to get an insight and learn about CVD coatings and its benefits for your industrial components applications.

10 pages | 20 minutes well spent

Industrial components coating solutions | Ionbond

You might be interested...

Coatings
Turbine blades gradient

Ionbond's Advanced Coating Solutions for the Aerospace Industry

As a leader in surface enhancement technology, Ionbond continues to set benchmarks in the aerospace sector with its innovative coating solutions. Our participation in prominent events such as the Farnborough International Airshow underscores our commitment to advancing aerospace technology.

Read more
Coatings
Ionbond new whitepaper deco low temp

NEW Whitepaper: Decorative PVD Coatings for low temperature on plastics

In the realm of product manufacturing, the quest for both aesthetic appeal and durability often leads to a common dilemma: how to make plastic components look more luxurious and stand up to the rigours of daily use. This is where the innovative use of Physical Vapor Deposition (PVD) coatings offers a solution that enhances both the visual and functional quality of plastic parts across various industries.

Read more
Service Centers
Plant exterior front 2

Ionbond Sweden opens new, high-capacity coating center

Ionbond Sweden is opening a state-of-the-art coating centre. The new facility will triple the company's floor space and boost production capacity, enabling to better serve various sectors, including cutting, forming, automotive, decorative, and industrial components. The new plant is carbon-neutral and is 100% renewable energy-powered. It is the result of the company’s commitment to growth and sustainability. Ionbond Sweden is now ready to take on larger orders, further solidifying its reputation as a dependable global partner for high-quality coating solutions.

Read more
Coatings
Tetrabond 48 trimming dies

Performance boost in aluminum forming: enabling cost-effective trimming of aluminum with Tetrabond™ (ta-C)

For companies in sheet metal forming, the generation of burrs and slivers is an ongoing challenge, especially when it comes to forming aluminum alloys. Burrs and slivers can reduce the final product quality and are costly to remove, which drives the search for solutions that prevent them from forming. Ionbond’s solution for this challenge is our Tetrabond tetrahedral amorphous carbon (ta-C) coating – a thin, extremely hard coating with a smooth surface and low sticking.

Read more
Coatings
Dulliken charge

Ionbond: high-tech coatings for luxury accessories available throughout Europe

Ionbond has been a leader in high-performance coatings for decades, for both technical applications and the luxury segment. In luxury products, we have especially earned a name for ourselves in beautiful, durable and high-quality coatings for watches, serving top brands. Today, this know-how has been extended to high-end accessories.

Read more
Coatings
Cutting Tools coating solutions | Ionbond

Ionbond’s coating solution for machining of non-ferrous materials for EU manufacturing industry

Are you looking to increase the performance of your cutting tools for machining non-ferrous materials? Ionbond has a coating solution that helps combat built-up edges, abrasive wear and more. It was designed specifically to allow you to make use of the great material properties of these materials, while increasing manufacturing efficiency.

Read more
Service Centers
Decorative automotive coating solutions | Ionbond

Major capacity increases at Ionbond Greensboro

Good news for customers in the USA and Canada: Ionbond has invested in its facility in Greensboro, doubling its capacity for decorative PVD coatings. The new machines not only increased the plant's overall coating capacity, but also its coating portfolio, including the color selection of decorative coatings.

Read more
Service Centers
Cutting Tools Non ferrous ISO N

Ionbond Germany now offers Tetrabond™ Plus

Tetrabond® Plus is now offered at Ionbond Germany's Saxony facility. This tool coating is ideal for machining non-ferrous materials, including aluminum alloys, copper alloys, plastics, and composite materials, making it particularly valuable for applications in the aerospace and automotive industries.

Read more
Service Centers
Rockaway Team DLC Hybrid Machine

Ionbond Rockaway enhances DLC coating capacity to support growing medical instrument industry

With the addition of a cutting-edge Hauzer 1200 PVD/PACVD hybrid tool, we're geared up to meet the soaring demand for quick turnaround times from our surgical instrument clients.

Read more
Coatings
Industrial components coating solutions | Ionbond

Tribobond™ 51/52/54 – Wear resistance for highly corrosive environments

Modern machinery, with its intricate demands for precision and reliability amid cost pressures, faces challenges. Coatings that provide both corrosion and wear protection are scarce. Read on for insights into innovative solutions addressing this critical gap.

Read more
Coatings
Decorative automotive coating solutions | Ionbond

Ionbond PVD coatings for automotive interior applications

Are you looking to stand out in automotive interior design with novel colors and increased wear resistance of design elements? Check out Ionbond’s expertise in PVD coatings at the Automotive Interiors Expo Novi from 24-26 October and find out more in below article.

Read more
Collaboration
H2 Hydrogen Charge Station

Ionbond joins Hydrogen Engine Alliance to advance the hydrogen internal combustion engine

Ionbond is proud to join the Hydrogen Engine Alliance! We’re looking forward to lending our expertise to the further development of this interesting technology for carbon-neutral mobility.

Read more
Coatings
Aurora X Plus Composition 2 c

AuroraX Plus: new versatile coating for a wide range of cutting applications

Have you been looking for a superior tool coating for difficult-to-cut materials? Look no further! Ionbond's new AuroraX Plus coating offers the performance you need in both wet and dry conditions, making it a great all-round tool coating.

Read more
Coatings
Decorative sanitary coating solutions

NEW Whitepaper: Decorative surfaces that withstand extreme environments

Are you looking for a coating to help your products keep their high performance in extreme environments?

Read more
Coatings
Decorative coating solutions for automotive interior | Ionbond

Ionbond’s high-quality decorative coatings for extreme environments

Curious about the magic behind long-lasting, beautiful items? Dive into the latest developments in Physical Vapor Deposition (PVD) coatings, revealing the secrets of our decorative finishes.

Read more