PVD coating solutions for hard chrome and PFAS replacement
Looking for non-toxic alternatives for hard chrome plating and PTFE coatings?
So have we! At Ionbond, we have developed PVD recipes that can offer a viable alternative to these typical coatings, even in heavily regulated industries such as the aerospace sector. Interested? Check out our article and let's meet at the Farnborough International Airshow to discuss your needs.
PVD films as a ‘green’ alternative to electroplating and PFAS
Hexavalent chromium (Cr6+) and PFAS (per- and polyfluoroalkyl substances) are commonly used in the application of specialty coatings, such as hard chromium (HCP) and PTFE (Teflon) coatings, to modify the surface properties of various parts used in industrial machinery. These coatings are widely used for protection against wear or corrosion, reduction of friction losses and providing special surface properties such as water repellency or electrical insulation.
Because of the environmental and health effects of these substances, there is increasing regulation of their industrial use. While the nature of the hazards is different for Cr6+ and PFAS, what they have in common is that they pollute the environment and present health risks for humans. There is a growing consensus that use of these substances will soon be either banned or severely restricted by governmental regulations in most developed countries. That means we need alternatives to these widely used coatings.
Different technologies can provide much of the same protection
To replace HCP in applications where wear and corrosion protection are needed, alternatives exist that have no environmental impact and health hazards: physical vapor deposition (PVD) and plasma-assisted chemical vapor deposition (PACVD) coatings. They provide excellent wear resistance, reduced friction, and enhanced hardness. These coatings are typically harder than chrome plating and can be engineered to offer specific properties like:
Enhanced corrosion resistance
Higher adhesion strength
Tailored surface characteristics
PVD and PACVD can also be used to replace PTFE-based films, providing friction reduction, corrosion protection, water repellency and electrical insulation, with zero or minimal environmental impact.
Developments especially important for the aerospace industry
This restriction on the use of PFAS and Cr6+ will cause tremendous problems for the aerospace industry in particular. Many companies are proactively looking for suitable alternatives. For instance, Airbus: one of the first aircraft manufacturers to include PVD and PACVD coatings into their list of approved manufacturing processes, known as AIPS (Airbus Incorporated Process Specification). They were originally looking into these coatings to increase the performance of their components, but easily accepted them as very handy replacements for environmentally challenging ones. Ionbond is happy to work with more companies in the aerospace sector for their HCP and PTFE replacement projects.
Ionbond – hard chrome and PFAS replacement experts
Ionbond has substantial experience in offering these coating solutions with no environmental impact, including for the aerospace industry. With this experience, we know that there is no universal coating that can replace HCP or PTFE on all applications. Therefore, we use a case-by-case approach, with careful application analysis. It is the only way to recommend potential alternatives.
To navigate through the application details and enable this analysis, Ionbond engineers created a special questionnaire, see below. It compiles all necessary information to help us select a suitable coating. Once we analyze this information, we can propose suitable alternatives, usually followed by trials. Through our experience with HCP and PTFE replacement projects, we have developed several customized versions of our standard coatings, that are more suitable as HCP or PTFE replacement.
Contact our engineers
Looking for a coating solution for hard chrome replacement?
Complete and submit our questionnaire for a customized replacement solution tailored to the unique requirements of your application.
Dr. Val Lieberman
Global Segment Manager Industrial Components
Dr. Val Lieberman
Global Segment Manager Industrial Components
Come see us at Farnborough International Airshow!
In short, PVD and PACVD coatings are a viable replacement for HCP and PFAS-based coatings in the aerospace industry.
Are you attending FIA from 22-26 July 2024? Make sure to stop by our booth 3934 in hall 3. We would be happy to discuss thebenefits of PVD and PACVD in terms of environmental safety, regulatory compliance, performance, and cost-efficiency. We are confident that, as the industry continues to prioritize sustainability and regulatory compliance, the adoption of these coatings is expected to grow. Come talk to us if you want to be a driver of innovation and improvement in aerospace technology. Our specialists will be happy to recommend a suitable ‘green’ coating solution, tailored for your specific application.
You might be interested...
Expanding coating capacity at Ionbond Berthecourt
We are pleased to announce a major investment at our Berthecourt facility: the installation of a new Hauzer Flexicoat 1000 machine featuring advanced CARC+ technology. This strategic upgrade significantly expands our coating capacity and productivity, enabling us to meet growing customer demands with greater efficiency.
Ionbond™ CVD 29 Ultra: Enhanced performance in continuous and interrupted cutting
Ionbond is pleased to announce our latest addition to our chemical vapor deposition (CVD) coating portfolio: Ionbond™ CVD 29 Ultra. This coating provides an impressive performance boost in demanding applications, such as high-performance continuous and interrupted machining.
55 years of CVD coating: great memories and a promising future
Ionbond & Bernex celebrates 55 years of CVD coating excellence from Swiss origins to global innovation. Discover our journey, future vision, and industry impact. Read the full interview to explore how we’re shaping the next chapter in surface technology.
Ionbond Ducro Coatings - cold dark black chrome PVD coating with superior characteristics
A striking cold anthracite color + excellent performance in extreme conditions. That’s the Ionbond Ducro coating. Read more about the Ducro benefits and let yourself be wowed by its looks.
Ionbond expands DLC coating capacity in Toulouse
Ionbond is proud to announce a strategic investment in its Grisolles facility near Toulouse, France, with the installation of an HC1200 coating system from IHI Hauzer to significantly expand our DLC (Diamond-Like Carbon) coating capacity.
Join the Ionbond Summer School about fundamentals of PVD coatings for decorative applications
We are excited to launch the second edition of the Ionbond Summer School program. This time on the fundamentls of Physical Vapor Deposition (PVD) for Decorative Applications. Discover and learn more about the technology, color ranges, and how to choose the right coating for your application.
Anti-fingerprint coatings from Ionbond: beautiful, smudge-free surfaces
Fingerprints on phones, glasses and household appliances are a worldwide annoyance to users. Check out Ionbond’s decorative PVD coatings that keep items and appliances looking pristine.
From print to performance: Enhancing additive manufacturing tools with PVD coatings for plastic molding
As additive manufacturing (AM) continues to revolutionize tool design and production, combining it with advanced surface technologies is opening new possibilities - particularly in plastic molding applications. Applying wear-resistant Physical Vapor Deposition (PVD) coatings to complex 3D printed tools significantly enhances their durability and performance. This synergy not only extends tool life but also improves productivity by reducing cycle times, machine downtime, and maintenance needs - making it a game-changer for high-efficiency manufacturing environments like bottle cap production. Read on to discover more!
New whitepaper: the future of semiconductor manufacturing with Ionbond’s PVD coatings
Do you want to take your semiconductor manufacturing to the next level? Ionbond has just published a whitepaper on its advanced coatings, designed to enhance longevity, improve component performance, and cut maintenance costs of various semiconductor tools. Semiconductor machinery often operates in extreme conditions, leading to various performance challenges, costly down times, and inefficiencies that impact production. Ionbond’s coatings offer innovative solutions with superior wear resistance, reduced friction, and other properties that are in demand.
Safran cooperates with Ionbond to develop coatings for outer space
PVD and CVD coatings are usually associated with wear resistant films, which extend useful life of tools and machine parts. However, these coatings can also provide a variety of other unique surface properties. Ionbond’s logo ‘The Surface Engineers’ reflects the fact that we specialize in engineering of the surface to meet the application needs.
Ionbond™ 357: Advanced duplex coating for extreme forging conditions
Are you looking for a solution to crack formation, heat checking and die fatigue in hot forging applications? Ionbond has developed a new duplex coating that provides 300-500% more productivity. Read on to learn more!
New whitepaper: Ionbond’s food-safe and FDA-approved coatings
Do you have an application in food contact or a medical application, and would you like to improve the performance of your components and machinery? Then download our new whitepaper on the various FDA-approved coatings in the Ionbond portfolio. In this quick read, we address the main criteria that food contact coatings have to meet, and of course show you the benefits of using Ionbond PVD coatings on durability, parts lifetime and productivity.
High-quality coating solutions for decorative applications at Ionbond Turkey
Ionbond Turkey unveils a new facility with advanced PVD coating technology, offering luxurious finishes in gold, dark black, and a variety of metallic tones. Perfect for the high-end Turkish market. Read the full article to discover more!
NEW Whitepaper: DLC Coating solutions for high-load applications in the automotive industry
The automotive industry is undergoing a transformation toward sustainable mobility, increasing the demand for durable and wear-resistant components. Ionbond presents its latest Whitepaper on advanced Diamond-Like Carbon (DLC) coatings, designed to withstand extreme stresses in automotive powertrains.
New machine for world-class automotive coatings at Ionbond India
Ionbond India has installed a second new PVD system within months. Following a machine for cutting tools, their Chennai plant now features a Hauzer Flexicoat® 1500 for high-volume automotive production. Read on to discover more!