PVD coating solutions for hard chrome and PFAS replacement
Looking for non-toxic alternatives for hard chrome plating and PTFE coatings?
So have we! At Ionbond, we have developed PVD recipes that can provide a viable alternative to these common coatings, even in highly regulated industries like the aerospace sector. Sounds interesting? Read our article and let’s meet up at the Farnborough International Airshow to discuss your application.
PVD films as a ‘green’ alternative to electroplating and PFAS
Hexavalent chromium (Cr6+) and PFAS (per- and polyfluoroalkyl substances) are commonly used in the application of specialty coatings, such as hard chromium (HCP) and PTFE (Teflon) coatings, to modify the surface properties of various parts used in industrial machinery. These coatings are widely used for protection against wear or corrosion, reduction of friction losses and providing special surface properties such as water repellency or electrical insulation.
Because of the environmental and health effects of these substances, there is increasing regulation of their industrial use. While the nature of the hazards is different for Cr6+ and PFAS, what they have in common is that they pollute the environment and present health risks for humans. There is a growing consensus that use of these substances will soon be either banned or severely restricted by governmental regulations in most developed countries. That means we need alternatives to these widely used coatings.
Different technologies can provide much of the same protection
To replace HCP in applications where wear and corrosion protection are needed, alternatives exist that have no environmental impact and health hazards: physical vapor deposition (PVD) and plasma-assisted chemical vapor deposition (PACVD) coatings. They provide excellent wear resistance, reduced friction, and enhanced hardness. These coatings are typically harder than chrome plating and can be engineered to offer specific properties like:
Enhanced corrosion resistance
Higher adhesion strength
Tailored surface characteristics
PVD and PACVD can also be used to replace PTFE-based films, providing friction reduction, corrosion protection, water repellency and electrical insulation, with zero or minimal environmental impact.
Developments especially important for the aerospace industry
This restriction on the use of PFAS and Cr6+ will cause tremendous problems for the aerospace industry in particular. Many companies are proactively looking for suitable alternatives. For instance, Airbus: one of the first aircraft manufacturers to include PVD and PACVD coatings into their list of approved manufacturing processes, known as AIPS (Airbus Incorporated Process Specification). They were originally looking into these coatings to increase the performance of their components, but easily accepted them as very handy replacements for environmentally challenging ones. Ionbond is happy to work with more companies in the aerospace sector for their HCP and PTFE replacement projects.
Ionbond – hard chrome and PFAS replacement experts
Ionbond has substantial experience in offering these coating solutions with no environmental impact, including for the aerospace industry. With this experience, we know that there is no universal coating that can replace HCP or PTFE on all applications. Therefore, we use a case-by-case approach, with careful application analysis. It is the only way to recommend potential alternatives.
To navigate through the application details and enable this analysis, Ionbond engineers created a special questionnaire, see below. It compiles all necessary information to help us select a suitable coating. Once we analyze this information, we can propose suitable alternatives, usually followed by trials. Through our experience with HCP and PTFE replacement projects, we have developed several customized versions of our standard coatings, that are more suitable as HCP or PTFE replacement.
Contactez nos ingénieurs
Vous recherchez une solution de revêtement pour le remplacement du chromage dur?
Complétez et soumettez notre questionnaire pour obtenir une solution de remplacement personnalisée, adaptée aux exigences uniques de votre application.
Dr. Val Lieberman
Responsable du segment mondial Composants
Dr. Val Lieberman
Responsable du segment mondial Composants
Come see us at Farnborough International Airshow!
In short, PVD and PACVD coatings are a viable replacement for HCP and PFAS-based coatings in the aerospace industry.
Are you attending FIA from 22-26 July 2024? Make sure to stop by our booth 3934 in hall 3. We would be happy to discuss thebenefits of PVD and PACVD in terms of environmental safety, regulatory compliance, performance, and cost-efficiency. We are confident that, as the industry continues to prioritize sustainability and regulatory compliance, the adoption of these coatings is expected to grow. Come talk to us if you want to be a driver of innovation and improvement in aerospace technology. Our specialists will be happy to recommend a suitable ‘green’ coating solution, tailored for your specific application.
Vous pourriez être intéressé...
PVD for high-quality automotive design – a growing trend
More and more automotive designers are looking to physical vapor deposition (PVD) coatings to give their car interiors and exteriors an exclusive esthetic. PVD coatings are thin, durable, scratch and wear resistant, and have a premium look and feel. Ionbond is working with high-end car brands to deliver the optimum coating solution for their unique designs. Want to hear more about what we’re doing in this area? Come talk to us at IZB in Wolfsburg, 22-24 October 2024.
Watch our new corporate video!
At Ionbond, we are proud of what we have achieved. We have over 30 coating centers around the world, a fleet of high-tech coating machines and a wide range of proven, innovative PVD, CVD and PACVD coatings. More than that, we are proud to offer the largest network of surface engineers, ready to provide local support to our customers everywhere.
Ionbond visiting FABTECH in October!
Join us at our boothS30103 in Orlando, Florida (USA), from October 15 to 17 for the 2024 edition of FABTECH, North America’s largest trade show for metal forming and fabricating. We’re looking forward to showing our premium performance coatings for forming metals and non-ferrous metals, aluminum die casting as well as our developments in plasma nitriding for duplex coatings. In addition, we’d love to hear about your current projects and challenges in forming and molding.
New! Whitepaper on coating development for a hydrogen application
We are proud to present our whitepaper on developing coating solutions for components used in hydrogen, for instance in a hydrogen internal combustion engine. This is a lesser-known application of hydrogen technology for mobility – compared to the more well-known hydrogen fuel cells – yet with strong potential for specific applications such as long haul trucks and heavy duty construction vehicles. The whitepaper is available for download now! Let’s start with a little preview of what it covers.
Ionbond’s technological developments in cutting tool coatings in the USA
We’ve got several interesting pieces of news for cutting tool manufacturers in North and Latin America! With new technology in the Ionbond coating center in Duncan (South Carolina), it will be the second USA coating center after Madison Heights (Michigan) to offer the recently developed universal AuroraX™ Plus coating. In addition, both coating centers offer many of the other Ionbond Premium Plus PVD coatings, such as Tetrabond™ Plus, Hardcut™ Plus, Crosscut™ Plus and Maximizer™ Plus. Finally our coating center in Cleveland (Ohio) is expanding capacity with the installation of state-of-the-art CVD technology by the end of 2024.
Join the Ionbond Summer School about Duplex Coatings
We are excited to launch the first Ionbond Summer School program on Duplex Coatings. Discover and learn more about how to boost the performance of your forming application with duplex coatings and plasma nitriding in 5 insightfull lessons.
PVD coating solutions for hard chrome and PFAS replacement
Looking for non-toxic alternatives for hard chrome plating and PTFE coatings?
So have we! At Ionbond, we have developed PVD recipes that can provide a viable alternative to these common coatings, even in highly regulated industries like the aerospace sector. Sounds interesting? Read our article and let’s meet up at the Farnborough International Airshow to discuss your application.
Ionbond's Advanced Coating Solutions for the Aerospace Industry
As a leader in surface enhancement technology, Ionbond continues to set benchmarks in the aerospace sector with its innovative coating solutions. Our participation in prominent events such as the Farnborough International Airshow underscores our commitment to advancing aerospace technology.
NEW Whitepaper: Decorative PVD Coatings for low temperature on plastics
In the realm of product manufacturing, the quest for both aesthetic appeal and durability often leads to a common dilemma: how to make plastic components look more luxurious and stand up to the rigours of daily use. This is where the innovative use of Physical Vapor Deposition (PVD) coatings offers a solution that enhances both the visual and functional quality of plastic parts across various industries.