Industrial Components
Tribobond™ 34
Wear resistant coating with a top oxide layer
Tribobond™ 34 CrON features standard CrN coating with a top layer of CrON. Presence of the oxide film on the surface adds additional functionalities to the coating. Among those are decreased affinity to non-metallic materials, like elastomeric seals and components, lower friction in certain lubricating conditions, anti-sticking and improved resistance to stick-slip phenomenon and certain corrosive environments.
The main and oxide layers are produced in a single coating cycle, so there is no need for additional processing.
Technical data
Material
Cr0N
Technology
PVD Arc
Thickness range [µm]
2 - 5μm
Microhardness, HV
1800 - 2200
Friction vs. Steel
<0.55
Service Temperature
180 - 350°C
Process Temperature
700°C
Color
Black/Rainbow
Tribobond™ 01
Traditional coating for a wide range of component applicationTribobond™ 01 TiN is arguably the oldest and most popular of PVD coatings. Aesthetically pleasing gold color and …
Read more
Tribobond™ 15
Wear resistance coating for high temperature applicationsIonbond’s Tribobond™ 15 TiAlCrN coating possesses an impressive combination of properties; high hardness, excellent t…
Read more
Tribobond™ 20
Wear resistance coating for high temperature applicationsIonbond’s Tribobond™ 20 AlTiN coating is designed to provide wear and oxidation protection at temperatures of up to …
Read more
Tribobond™ 30
High temperature resistant coating with excellent toughnessTribobond™ 30 CrN has a good combination of properties; high hardness, excellent toughness, high wear and impact fa…
Read more
Tribobond™ 31
Low stress wear resistant coating with smooth surfaceSub-stoichiometric Tribobond™ 31 Cr2N features lower residual stress than many other coatings from the Tribobond™…
Read more
Tribobond™ 40
DLC-based coating for highly loaded industrial and automotive componentsIonbond’s Tribobond™ 40 DLC, also designated as a-C:H:W, is one of the widely used coatings for indust…
Read more
Tribobond™ 41
DLC coating with superior sliding propertiesIonbond’s Tribobond™ 41 DLC a-C:H:W + a-C:H coating has been used for high volume automotive production for many years. It combine…
Read more
Tribobond™ 42
DLC coating for highly loaded industrial components and high volume automotive applicationsIonbond’s Tribobond™ 42 DLC, CrN + a-C:H, coating is engineered for very highly loa…
Read more
Tribobond™ 43
DLC coating for industrial components with unique propertiesIonbond’s Tribobond™ 43 DLC (a-C:H) is a pure DLC coating, which is widely used for boosting performance of tools…
Read more
Tribobond™ 46
DLC coating for highly loaded applications with rolling contactsIonbond’s Tribobond™ 46 DLC, CrN + a-C:H:W has a top layer similar to Tribobond™ 40; however it is deposited o…
Read more
Tribobond™ 48
Hydrogen-free DLC coating for high temperature applicationsTribobond™ 48 ta-C is a hydrogen-free DLC coating with an increased temperature resistance of up to 400 °C compared…
Read more
Tribobond™ 55
Special coating for vacuum and dry environmentsTribobond™ 55 is a specialty coating, which was developed to address tribological applications in dry environments, such as dry…
Read more
Tribobond™ 66
Corrosion resistant aluminium coatingAluminum coatings offer remarkable improvement in corrosion resistance. In this case, the coating acts as a sacrificial anode in galvanic…
Read more
Ionbond™ CVD
Ionbond™ CVD Coatings for Components ApplicationsOne of the limitations of the PVD and PACVD technologies is their inability to promote coatings into inner surfaces, like hol…
Read more