Tribobond™ 55 – new coating for vacuum and dry gas environments
Ionbond presents Tribobond™ 55, developed specifically for vacuum and dry gas environments!
In the last 20 to 30 years, diamond-like carbon (DLC) coatings have established themselves as an excellent means to dramatically improve wear resistance and reduce friction in tribological contacts.
The friction reduction helps to decrease wear and has other benefits, such as improving efficiency by minimizing friction losses or lowering the temperature in the contact zone. But for dry and vacuum conditions, more is needed. Ionbond engineers have developed a specialty DLC coating, which addresses these applications.
Coatings that support the growing hydrogen economy and more
The demand for surface solutions applicable to dry and vacuum conditions has grown over the years. Industries are adapting vacuum for new semi-conductor processes, preparing for the use of hydrogen as a green fuel and requiring more robust solutions for pumps and valves operating in dry gas environment. While the remarkable properties of DLC shine in many environments, they may become compromised in these dry gas or vacuum environments.
In these environments, it is not uncommon for the coefficient of friction to become even higher than that of uncoated materials. The problem is that humidity/water vapour are partially responsible for ‘passivating’ fresh DLC material, which is exposed when wear occurs. If no or too little vapour is present, the fresh DLC surface remains active, ultimately leading to increased friction and wear. In order to overcome this, the DLC composition has to be modified, to provide an ‘internal source’ for keeping the surface energy low and, consequently, the friction too.
Proprietary recipe for extremely low friction in dry and vacuum conditions
With our Tribobond™ 55 coating, Ionbond engineers have created a customized DLC layer which exhibits an extremely low coefficient of friction in most dry and vacuum environments. Tribobond™ 55 helps reduce wear and energy losses related to friction. The new coating has undergone extensive testing in laboratory settings and in selected applications, and has already been applied to a number of commercial parts.
Interested? The Ionbond engineers would be happy to discuss your application to see if Tribobond™ 55 is the right solution for you.
Fragen?
Besprechen Sie Ihre Herausforderungen mit Val Lieberman
Dr. Val Lieberman, Globaler Segmentleiter Komponenten, wird Sie gerne unterstützen.
Wir werden uns schnellstmöglich mit Ihnen in Verbindung setzen.
Dr. Val Lieberman
Globaler Segmentleiter Komponenten
Dr. Val Lieberman
Globaler Segmentleiter Komponenten
Das könnte Sie auch interessieren...
New! Whitepaper on coating development for a hydrogen application
We are proud to present our whitepaper on developing coating solutions for components used in hydrogen, for instance in a hydrogen internal combustion engine. This is a lesser-known application of hydrogen technology for mobility – compared to the more well-known hydrogen fuel cells – yet with strong potential for specific applications such as long haul trucks and heavy duty construction vehicles. The whitepaper is available for download now! Let’s start with a little preview of what it covers.
Ionbond’s technological developments in cutting tool coatings in the USA
We’ve got several interesting pieces of news for cutting tool manufacturers in North and Latin America! With new technology in the Ionbond coating center in Duncan (South Carolina), it will be the second USA coating center after Madison Heights (Michigan) to offer the recently developed universal AuroraX™ Plus coating. In addition, both coating centers offer many of the other Ionbond Premium Plus PVD coatings, such as Tetrabond™ Plus, Hardcut™ Plus, Crosscut™ Plus and Maximizer™ Plus. Finally our coating center in Cleveland (Ohio) is expanding capacity with the installation of state-of-the-art CVD technology by the end of 2024.
Join the Ionbond Summer School about Duplex Coatings
We are excited to launch the first Ionbond Summer School program on Duplex Coatings. Discover and learn more about how to boost the performance of your forming application with duplex coatings and plasma nitriding in 5 insightfull lessons.
PVD coating solutions for hard chrome and PFAS replacement
Looking for non-toxic alternatives for hard chrome plating and PTFE coatings?
So have we! At Ionbond, we have developed PVD recipes that can provide a viable alternative to these common coatings, even in highly regulated industries like the aerospace sector. Sounds interesting? Read our article and let’s meet up at the Farnborough International Airshow to discuss your application.
Ionbond's Advanced Coating Solutions for the Aerospace Industry
As a leader in surface enhancement technology, Ionbond continues to set benchmarks in the aerospace sector with its innovative coating solutions. Our participation in prominent events such as the Farnborough International Airshow underscores our commitment to advancing aerospace technology.
NEW Whitepaper: Decorative PVD Coatings for low temperature on plastics
In the realm of product manufacturing, the quest for both aesthetic appeal and durability often leads to a common dilemma: how to make plastic components look more luxurious and stand up to the rigours of daily use. This is where the innovative use of Physical Vapor Deposition (PVD) coatings offers a solution that enhances both the visual and functional quality of plastic parts across various industries.
Ionbond Sweden opens new, high-capacity coating center
Ionbond Sweden is opening a state-of-the-art coating centre. The new facility will triple the company's floor space and boost production capacity, enabling to better serve various sectors, including cutting, forming, automotive, decorative, and industrial components. The new plant is carbon-neutral and is 100% renewable energy-powered. It is the result of the company’s commitment to growth and sustainability. Ionbond Sweden is now ready to take on larger orders, further solidifying its reputation as a dependable global partner for high-quality coating solutions.
Leistungssteigerung in der Aluminiumumformung: Kostengünstiges Schneiden und Besäumen von Aluminiumblechen mit Tetrabond™ (ta-C)
Für Unternehmen in der Blechformgebung ist die Entstehung von Graten und Spänen eine ständige Herausforderung, insbesondere bei der Umformung von Aluminiumlegierungen. Grate und Späne können die Qualität des Endprodukts beeinträchtigen und sind kostspielig zu entfernen, was die Suche nach Lösungen vorantreibt, die bereits ihre Entstehung verhindern. Die Lösung von Ionbond für diese Herausforderung ist unsere Tetrabond™-Beschichtung aus tetraedrisch amorphem Kohlenstoff (ta‑C) – eine dünne, extrem harte Beschichtung mit glatter Oberfläche und geringer Klebneigung.
Ionbond: high-tech coatings for luxury accessories available throughout Europe
Ionbond has been a leader in high-performance coatings for decades, for both technical applications and the luxury segment. In luxury products, we have especially earned a name for ourselves in beautiful, durable and high-quality coatings for watches, serving top brands. Today, this know-how has been extended to high-end accessories.