Industrial Components
Tribobond™ 66
Corrosion resistant aluminium coating
Aluminum coatings offer remarkable improvement in corrosion resistance. In this case, the coating acts as a sacrificial anode in galvanic corrosion, thus protecting the substrate. Ion Vapor Deposition (IVD) is a common method of producing such a film. Ionbond engineers have developed an alternative technique of production of Al coating using cathodic arc or sputtering PVD techniques.
The aluminum coatings produced by PVD methods fully meet the requirements of respective MIL specification and offer some performance advantages.
Technical data
Material
AI
Technology
PVD/PACVD
Thickness range [µm]
1 - 30μm
Microhardness, HV
n/a
Friction vs. Steel (dry)
n/a
Service Temperature
300°C
Process Temperature
<200°C
Color
Silver
Application Reference
Corrosion resistance
Tribobond™ 01
Traditional coating for a wide range of component applicationTribobond™ 01 TiN is arguably the oldest and most popular of PVD coatings. Aesthetically pleasing gold color and …
Read more
Tribobond™ 15
Wear resistance coating for high temperature applicationsIonbond’s Tribobond™ 15 TiAlCrN coating possesses an impressive combination of properties; high hardness, excellent t…
Read more
Tribobond™ 20
Wear resistance coating for high temperature applicationsIonbond’s Tribobond™ 20 AlTiN coating is designed to provide wear and oxidation protection at temperatures of up to …
Read more
Tribobond™ 30
High temperature resistant coating with excellent toughnessTribobond™ 30 CrN has a good combination of properties; high hardness, excellent toughness, high wear and impact fa…
Read more
Tribobond™ 31
Low stress wear resistant coating with smooth surfaceSub-stoichiometric Tribobond™ 31 Cr2N features lower residual stress than many other coatings from the Tribobond™…
Read more
Tribobond™ 34
Wear resistant coating with a top oxide layerTribobond™ 34 CrON features standard CrN coating with a top layer of CrON. Presence of the oxide film on the surface adds additio…
Read more
Tribobond™ 40
DLC-based coating for highly loaded industrial and automotive componentsIonbond’s Tribobond™ 40 DLC, also designated as a-C:H:W, is one of the widely used coatings for indust…
Read more
Tribobond™ 41
DLC coating with superior sliding propertiesIonbond’s Tribobond™ 41 DLC a-C:H:W + a-C:H coating has been used for high volume automotive production for many years. It combine…
Read more
Tribobond™ 42
DLC coating for highly loaded industrial components and high volume automotive applicationsIonbond’s Tribobond™ 42 DLC, CrN + a-C:H, coating is engineered for very highly loa…
Read more
Tribobond™ 43
DLC coating for industrial components with unique propertiesIonbond’s Tribobond™ 43 DLC (a-C:H) is a pure DLC coating, which is widely used for boosting performance of tools…
Read more
Tribobond™ 46
DLC coating for highly loaded applications with rolling contactsIonbond’s Tribobond™ 46 DLC, CrN + a-C:H:W has a top layer similar to Tribobond™ 40; however it is deposited o…
Read more
Tribobond™ 48
Hydrogen-free DLC coating for high temperature applicationsTribobond™ 48 ta-C is a hydrogen-free DLC coating with an increased temperature resistance of up to 400 °C compared…
Read more
Tribobond™ 55
Special coating for vacuum and dry environmentsTribobond™ 55 is a specialty coating, which was developed to address tribological applications in dry environments, such as dry…
Read more
Ionbond™ CVD
Ionbond™ CVD Coatings for Components ApplicationsOne of the limitations of the PVD and PACVD technologies is their inability to promote coatings into inner surfaces, like hol…
Read more