Cutting Tools

Ionbond™ CVD 08

Ionbond™ CVD 08 TiBN is a special multi-layer coating applied on tools used in high-volume machining. Applied by means of the CVD coating procedure, it exhibits a particular hardness and wear resistance due to Bor in TiBN.
In addition, Ionbond™ CVD 08 TiBN features a particularly low coefficient of friction, which facilitates chip flowl when machining stainless steels.

The combination of κ-Al2O3 and TiBN delivers an extremely high hot-hardness and a very low thermal conductivity, which significantly increases the tool’s lifetime. TiN, as a top layer, protects the hard TiBN coating from breakage during the cutting start-up phase.

Ionbond™ CVD 08 TiBN is applied at ca. 1000°C and is suited for cemented carbide cutting inserts exclusively.

Technical data

Material Ti (B,C,N)

Technology CVD

Thickness range [µm] 12 - 16 μm

Microhardness, HV 3500

Friction vs. Steel (dry) 0.2

Service Temperature 1000°C

Process Temperature 800 - 1000°C

Color Grey

Download factsheet

AuroraX Plus

AuroraX Plus is the new addition to Ionbond’s Premium Plus coatings with advanced arc technology. AuroraX Plus has been developed primarily for machining difficult-to-machine materials such as titanium alloys, nickel-based alloys, hard materials and stainless steel. When machining these demanding materials, the cutting tool is subjected to extensive wear under severe operating conditions ranging from high temperatures to heavy mechanical loads.

Hardcut™

Engineered for high speed machining of hard materials at minimum or zero lubrication conditions.

Hardcut™ Plus

Hardcut™ Plus, a TiSiN based multi-layer coating, has been developed for high speed end-milling and gear hobbing of the hardest and toughest materials including exotic nickel and titanium alloys under low lubrication and dry conditions.

Crosscut™

AlCrN coating for milling and gear cutting for substantial decrease of internal stress and withstanding high cutting temperatures

Crosscut™ Plus

Most versatile coating for wet and dry machining at medium to high speeds in milling, drilling and gear hobbing operations

Maximizer

TiAIN coating for coping with relatively high impact fatigue and shear stress

Maximizer Plus

TiAlN coating for milling and drilling of low to high tensile strength

Tetrabond™

DLC coating for complex tool geometries and a broad range of carbides

Cutting Tools Thermoplastics, graphite and composite materials Non-ISO

Tetrabond™ Plus

Smooth ta-C coating for machining non-ferrous metals

Optimizer™ Plus

Optimizer™ Plus is the latest premium coating of the Ionbond plus-family. At the top of our product line, and in addition to Crosscut™ Plus, this new AlCrN based coating is the optimal coating for wet and dry machining at medium to high speeds for milling, hobbing and bevel cutting operations with temperatures reaching up to 1080°C.

Ionbond™ 01

Ionbond™ 01 TiN multi-purpose coatingIonbond™ 01 is a multi-purpose coating suited for low and medium cutting speeds.Variety of standard cutting applicationsIonbond™ 01 TiN i…

Ionbond™ 42

DLC Coating for machining Al alloys and gummy materialsIonbond™ 42 is a Diamond Like Carbon (DLC) coating that is suited for machining aluminium alloys and other sticky mater…

Ionbond™ CVD 10

Ionbond™ CVD 10 TiN-TiCN-TiNIonbond™ CVD 10 is a classic CVD coating for high-volume milling of steels at moderate cutting speeds. Due to TiCN, the coating composition exhib…

Ionbond™ CVD 13

Ionbond™ CVD 13 TiCN-TiC-TiNIonbond™ CVD 13 is a multipurpose CVD coating for high-volume machining of metals, especially steels. Its primary feature is the ideal combinati…

Ionbond™ CVD 29

Ionbond™ CVD 29Ionbond™ CVD 29 is exceptionally well-suited for high-volume machining of cast iron and cast steel at medium to high cutting speeds and high temperatures due t…

Ionbond™ CVD 29 HSA Plus

Ionbond™ CVD 29 HSA Plus is exceptionally well-suited for high-volume machining of cast iron and cast steel at medium to high cutting speeds and high temperatures due to the thermo-dynamically stable structure of its ceramic content.

Ionbond™ CVD 29 Ultra

Ionbond™ CVD 29 Ultra is the latest addition to the Ionbond’s CVD coatings for cutting tool applications. Engineered for enhanced toughness and exceptional hardness, it offers outstanding wear resistance that reduces crater as well as flank wear, providing longer tool life.

All technologies