Tribobond™ 55 – new coating for vacuum and dry gas environments

Ionbond presents Tribobond™ 55, developed specifically for vacuum and dry gas environments!

Placeholder for Dieses Bild Original NehmenDieses Bild Original Nehmen

In the last 20 to 30 years, diamond-like carbon (DLC) coatings have established themselves as an excellent means to dramatically improve wear resistance and reduce friction in tribological contacts.

The friction reduction helps to decrease wear and has other benefits, such as improving efficiency by minimizing friction losses or lowering the temperature in the contact zone. But for dry and vacuum conditions, more is needed. Ionbond engineers have developed a specialty DLC coating, which addresses these applications.

Placeholder for Tribobond 55 MicrosectionTribobond 55 Microsection

Coatings that support the growing hydrogen economy and more

The demand for surface solutions applicable to dry and vacuum conditions has grown over the years. Industries are adapting vacuum for new semi-conductor processes, preparing for the use of hydrogen as a green fuel and requiring more robust solutions for pumps and valves operating in dry gas environment. While the remarkable properties of DLC shine in many environments, they may become compromised in these dry gas or vacuum environments.

In these environments, it is not uncommon for the coefficient of friction to become even higher than that of uncoated materials. The problem is that humidity/water vapour are partially responsible for ‘passivating’ fresh DLC material, which is exposed when wear occurs. If no or too little vapour is present, the fresh DLC surface remains active, ultimately leading to increased friction and wear. In order to overcome this, the DLC composition has to be modified, to provide an ‘internal source’ for keeping the surface energy low and, consequently, the friction too.

Placeholder for Tribobond 55 COF FF bTribobond 55 COF FF b

Proprietary recipe for extremely low friction in dry and vacuum conditions

With our Tribobond™ 55 coating, Ionbond engineers have created a customized DLC layer which exhibits an extremely low coefficient of friction in most dry and vacuum environments. Tribobond™ 55 helps reduce wear and energy losses related to friction. The new coating has undergone extensive testing in laboratory settings and in selected applications, and has already been applied to a number of commercial parts.

Interested? The Ionbond engineers would be happy to discuss your application to see if Tribobond™ 55 is the right solution for you.

有疑问吗?

与 Val Lieberman 讨论您面临的挑战。

全球分部经理组件 Val Lieberman 博士将非常乐意为您提供支持。

我们将尽快给您回复。

Placeholder for Val LiebermanVal Lieberman

Dr. Val Lieberman

全球分部经理组件

您可能会感兴趣...

Placeholder for Ionbond Industrial PortraitIonbond Industrial Portrait

Tribobond™ 51/52/54 – Wear resistance for highly corrosive environments

Modern machinery, with its intricate demands for precision and reliability amid cost pressures, faces challenges. Coatings that provide both corrosion and wear protection are scarce. Read on for insi…

阅读更多
Placeholder for Ionbond Deco Grill PortraitIonbond Deco Grill Portrait

Ionbond PVD coatings for automotive interior applications

Are you looking to stand out in automotive interior design with novel colors and increased wear resistance of design elements? Check out Ionbond’s expertise in PVD coatings at the Automotive Interior…

阅读更多
Placeholder for H2 Hydrogen Charge StationH2 Hydrogen Charge Station

Ionbond joins Hydrogen Engine Alliance to advance the hydrogen internal combustion engine

Ionbond is proud to join the Hydrogen Engine Alliance! We’re looking forward to lending our expertise to the further development of this interesting technology for carbon-neutral mobility.

阅读更多
Placeholder for Aurora X Plus Composition 2 cAurora X Plus Composition 2 c

AuroraX Plus: new versatile coating for a wide range of cutting applications

Have you been looking for a superior tool coating for difficult-to-cut materials? Look no further! Ionbond's new AuroraX Plus coating offers the performance you need in both wet and dry conditions, m…

阅读更多
Placeholder for Ionbond Deco Shower head PortraitIonbond Deco Shower head Portrait

NEW Whitepaper: Decorative surfaces that withstand extreme environments

Are you looking for a coating to help your products keep their high performance in extreme environments?

阅读更多
Placeholder for Ionbond Deco Navi PortraitIonbond Deco Navi Portrait

Ionbond’s high-quality decorative coatings for extreme environments

Curious about the magic behind long-lasting, beautiful items? Dive into the latest developments in Physical Vapor Deposition (PVD) coatings, revealing the secrets of our decorative finishes.

阅读更多
Placeholder for Ionbond Forming Molding PortraitIonbond Forming Molding Portrait

New Whitepaper on Duplex Coating Solutions for High-Pressure Die Casting

Read along to find out why high-pressure die casting is becoming increasingly popular for high-volume mass production of complex-shaped parts.

阅读更多
Placeholder for Dieses Bild Original NehmenDieses Bild Original Nehmen

Tribobond™ 55 – new coating for vacuum and dry gas environments

Ionbond presents Tribobond™ 55, developed specifically for vacuum and dry gas environments!

阅读更多
Placeholder for Ionbond Duplex Coatings Plasma Nitriding partsIonbond Duplex Coatings Plasma Nitriding parts

Ready to learn more about Ionbond’s duplex coating solutions?

Download our comprehensive technical presentation, including fundamentals, illustrative examples and real case studies of our duplex coatings in use at Ionbond’s clients.

阅读更多